Multifunctional Wiring Harness for Coin-operated Self-service Equipment
Description
一、产品基础信息
- Part Number：PIW-3138C
- Customer Part Number：C130006
- Version：D2 (Latest revision, new label dated 2017/11/27)
- 1
- 单位：mm
- 符合标准：ROHS 6/6 环保标准
二、结构与尺寸参数
表格
| Parts | Dimension Parameters |
|---|---|
| Overall Length (P1 to branch end) | 600±15mm |
| P1 to branch point | 290±10mm |
| Branch point to P2 end | 215±15mm |
| Branch point to P3 end | 310±10mm |
| P1 inner mold length | 100±10mm |
| Terminal crimping length | 30±7mm |
| General Tolerance | ±0.5/±0.3/±0.2 |
三、线材与电气特性
- Wire Specification：
- Main cable: UL20855 26AWG, 13C/11C/10C core, conductor OD: 5.6mm
- Jacket material: TPE (Halogen-free, Pantone 101C Yellow)
- Branch wire: AWG22~16, white insulated wire end terminals
- Electrical Performance：
- Continuity test：100% open/short circuit testing
- Withstand voltage：DC 300V, duration 0.1 seconds
- Insulation Resistance：≥10MΩ (Minimum)
- Conduction resistance：≤3Ω (Maximum)
- Built-in resistor：10kΩ ±1%, 1/8W (encapsulated with black heat shrink tube)
IV. Connector and Terminal Specifications
表格
| Interface End | Type | Terminal / Housing Specifications |
|---|---|---|
| P1 | 40Pin Male Connector | Molex 503110-4001, Dual-Row Housing, Wire-to-Board Crimp Terminal (1.25mm Pitch) |
| P2/P3 | Fork / Ring Terminal | Fully insulated nylon female terminals, colored nylon insulated terminals, suitable for AWG16~22 wire gauge |
| Power terminal | Power input terminal | Insulated wire end terminals (White, L=8mm, AWG24) |
V. Core Wire Position Function Definition
表格
| P1 Pin | Wire Color | Function Label | Corresponding interface end |
|---|---|---|---|
| 1 | Green | AIR COIN SW NO | P3 |
| 3 | Blue | VAC COIN SW NO | P3 |
| 5 | Orange | AIR RELAY -4 | P2 |
| 7 | Yellow | VAC RELAY -4 | P2 |
| 20/22 | Red | AC/DC IN+ | Power positive input terminal |
| 24/26 | Black | AC/DC IN- | Power negative input terminal |
| 19 | White | LOCK SIGNAL | P3 |
| 30 | Purple | Collection SW NO | P2 |
| 31 | Grey | Collection SW Common | P2 |
| 33 | Brown | Temp Sensor | P2 |
| 35 | Light green | Door open NO | P2 |
VI. Materials and Packaging
- Materials：
- Inner mold: LD-PE (Low Density Polyethylene)
- Outer jacket: PVC-45P (Pantone 101C Yellow)
- Heat Shrink Tube: Black, OD: 2.0mm/3.0mm/5.0mm, Length: 6~25mm
- Packaging：1PCS/PE Bag
VII. Application Scenarios
Suitable for control and signal transmission of self-service equipment / coin-operated equipment, supporting air/vacuum relay control, coin communication, temperature detection, door status detection and power input functions.
Shipping and Delivery
Chinese 
English 
Russian